What's HERE: Biltwell's Builder Exhaust Kit is exactly what its name implies: a selection of pre-fabbed tubing, header flanges and exhaust tips that puts the art of custom exhaust building in the hands of backyard fabricators. Each Builder Exhaust Kit includes the following:
- Four 16-inch-long (350mm) straight sections
- Two 3.5-inch radius (90mm) U-bends with straights
- Two 5-inch radius (134mm) U-bends with straights
- Two Evolution flanges
- Two Shovelhead flanges
- Two Ironhead flanges
- Two STD flanges
- Two fishtail tips
SURFACE FINISH: All raw tube sections are pre-polished to make chroming after joint finishing easier.
D - 05/03/2013
Pros - good quality steel and plenty of bends
Cons - measure twice, cut once
Couldn't find exhaust I liked for the bobber. So fuck it I made my own. I'd rather say I made it than bought it anyways.
redeye - 04/23/2013
Pros - awesome kit .. alot of tasty bends
Cons - i had to buy factory flanges but still totally worth it
Its a good kit and it don't brake the bank
william ewing - 12/15/2012
Awesome product everything you need except skill...lol. The hardest part was getting the angles and cuts figured out. I probably could make one more set of pipes. It's way better and cheaper than off the shelf Ironhead pipes, the few that are out there. Of course the best part is when people ask about the cool pipes you can say, "I built them."
Sam - 01/31/2012
Pros - List goes on and on...do not have a tubing bender so this is not an option it is a must have...
Cons - None...
Makes building your own pipes real easy with good results (skill of welder of course a factor)
Well this is embarrassing...something went wrong. A team of highly trained monkeys has been dispatched to deal with this situation. Please try and reload this page.