CUSTOMER SERVICE +1 (855) 456-9276
FREE SHIPPING ON ALL U.S. ORDERS OVER $100*

Making Your Throttle Cable Fit Your Amal Carburetor

This is a simple piece of advice but can be helpful. Most new throttle cables you can get for your British motorcycle with have cable stops that are too large to fit in the adjuster that is found on the top of the Amal carburetor. There is a simple fix shown here that will keep you from having
loose cables flopping around where they meet the carbs. Also, being that there are often adjusters at the throttle assembly as well as having an inline adjuster, a 3rd one at the carb is quite unnecessary, and you can do without one..

Measure the end of your throttle cable, they are typically just under a quarter inch, so a 1/4" drill bit should work great.

Remove the top of your Amal carb and clamp it in a vise. Notice the aluminum angle pieces in the jaws of my vice to keep from marring soft metal. Use a bit of cutting oil and drill half way through the threads in the cap. Don't drill all the way through or you will not have a lip left for your cable stop to rest at.

Here is the carb top reinstalled with the throttle cable now nestled snug.

Leave a Reply
  •