{"product_id":"fast-eddy-co-no-25-tappet-axle-roller-replacement-tool","title":"No. 25 Tappet Axle \/ Roller Replacement Tool","description":"\u003cp\u003eThis is the best tool you will ever find for replacing the tappet rollers on Knuckles, Pans, Shovels, and Ironhead Sportsters.  This tool is 100% made in the USA and is built to last.  It's not cheap, but it's the best one you'll find anywhere. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Info:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAllows for fast, easy, and precise replacement of tappet rollers.\u003c\/li\u003e\n\u003cli\u003eFits lifters from 1936-1983 Big Twin models, 1957-1985 XL models, or any other lifer with a .730-.740 body diameter, .850-.855 roller diameter, and .355-.370 roller width.  Will not fit evo or twin cam lifters\u003c\/li\u003e\n\u003cli\u003ePrecision machined with very tight tolerances for a perfect fit.  Lifter will not move around when performing operations.\u003c\/li\u003e\n\u003cli\u003eType III mil spec hard anodized finish for incredible durabilty.\u003c\/li\u003e\n\u003cli\u003eEasily clamps into vise to make the whole job easy.\u003c\/li\u003e\n\u003cli\u003e100% made in USA\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Use:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eStep 1: drill out ends of old axle\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse included 7\/32\" drillbit and drill about 1\/16\" into each side of the old tappet axle.\u003c\/li\u003e\n\u003cli\u003eLightly oil the drill bit before putting in through the hardened drill bushing.  Be sure to blow chips out in between drilling the two sides of the lifter. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eStep 2: Drive out old axle\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarefully drive out the old tappet axle using the included pin punch.  This should take a few firm strikes from a 16oz ballpeen hammer.  If 2-3 firm strikes aren't enough to start moving the old axle out, take out the lifter and move it back to station\/step 1 and drill out a little more of the end of the axle before continuing again to step 2 and driving the axle out. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eStep 3: Install new roller assembly and set the ends of new axle\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInstall new\/replacement roller assembly and axle into lifter body.  New axle should slide right through lifter body without being forced.  Set lifter assembly into station\/step 3 of the tool and use the included roll pin punch to lightly set the ends of the new axle on each side.  This should take just 2-3 light\/medium strikes with a 16oz ballpeen hammer.\u003c\/li\u003e\n\u003cli\u003eIts best to flip the lifter back and fourth a couple of times between the first few light strikes with a hammer.  Axle should remain centered within the lifter body, with an equal amount of the axle protruding out of each side.  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eWarning:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBe sure the new axle is secure and has no detectible movement.  \u003c\/li\u003e\n\u003cli\u003eBe sure the new roller moves freely\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fast Eddy Co.","offers":[{"title":"Default Title","offer_id":45849837895727,"sku":"018338","price":329.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0097\/0506\/2447\/files\/018338-FastEddyCo-No.25TappetAxle-RollerReplacementTool-1.jpg?v=1789747572","url":"https:\/\/www.lowbrowcustoms.com\/products\/fast-eddy-co-no-25-tappet-axle-roller-replacement-tool","provider":"Lowbrow Customs","version":"1.0","type":"link"}