This Triumph throttle cable is for Triumph motorcycles 1968 & later with Amal concentric carburetors (928, 930, 932 etc). 42" long...
Read more
This Triumph throttle cable is for Triumph motorcycles 1968 & later with Amal concentric carburetors (928, 930, 932 etc). 42" long. Single cable for TR6 and TR7 models, or if you have a dual cable Throttle you can use these on a T120 Bonneville (using two of these cables, one per carburetor). Replacement for OEM 60-1819. Made in the UK.
| THROTTLE & IDLE CABLE MEASUREMENTS |
| Cable End Type |
Push In
|
| Elbow Length |
N/A
|
| Elbow Angle |
N/A
|
| Housing Length |
43"
|
| Free Play |
3-3/8" |
 |
|
THROTTLE & IDLE CABLE MEASUREMENT DEFINITIONS
See the example diagram above to see how this cable is measured. Note that the diagram is just an example, and is not a drawing of this exact cable! Also, there can be variations of these measurements by +/- .25" (6mm) due to manufacturing tolerances.
Elbow Length: Overall length of elbow section, if there is one.
Elbow Angle: 45 degree, 90 degree, or N/A (no elbow)
Housing Length: Overall length of cable housing, not including adjuster or elbow. Measurement stops at elbow where black housing meets chrome.
Free Play: The full amount of travel of the inner cable. Pull inner cable fully to one side, measure length, not including cable end (ferrule) or return spring.
|
Read less
