English 101 is a full tune & service video manual that covers pre-unit and unit Triumphs and unit BSAs. In this interactive shop manual, watch step-by-step as Wes White demonstrates everything you need to keep your British bike reliable, on the road and running great. This 4-hour video is broken down into easy-to-follow chapters and is designed to teach you how to maintain your British motorcycle
Own your own copy of this English 101 dvd and if you are in need more British motorcycle knowledge in your life, check out English 102. You can check ot more in-deep videos for Triumph installation below:
- VIDEO: HOW TO INSTALL A PAZON ELECTRONIC IGNITION ON YOUR VINTAGE TRIUMPH MOTORCYCLE
- VIDEO: TRIUMPH TIMING COVER PATENT PLATE REMOVAL & INSTALLATION
Check out the Lowbrow Customs YouTube channel to check out all of our videos. We spend a lot of time and effort creating motorcycle how-to videos, product reviews and event coverage for your enjoyment, please let us know what you think. Click here to subscribe to the Lowbrow Customs YouTube channel and stay in the know!
Time Stamp Breakdown:
01:24 - Introduction and Valve Adjustments
03:06 - Valve adjustments on Triumph Unit motor out of bike.
14:13- Tips on doing a valve adjustment on a Triumph Pre-unit motor while motor is in a bike.
15:13 - BSA Valve adjustment.
22:28 - Oil in frame Triumph Unit motors look different.
23:22 - BSA Primary side and adjustments overview.
26:42 - BSA motorcycle overview, difference and similarities to Triumph
32:08 - Finding Top Dead Center
32:10 - Finding top dead center on a Triumph Unit motor.
49:03 - Finding top dead center on a Triumph Pre-Unit motor.
58:41 - Ignition Systems - Magneto, Electronic ignition and points.
58:45 - How to install and time a Joe Hunt Magneto on a Triumph Unit motor.
01:13:20 - How to set up and use a timing light and what to do for points, electronic or mag.
01:14:56 - Installing a Lucas Magneto on a Triumph Pre-Unit Motor.
01:19:00 - Installing advance wheel, see the difference in two different kinds.
01:20:10 - How to install full advance bob weight wheel.
01:23:00 - How to install normal advance wheel.
01:27:25 - Oil Systems and Oil Changes.
01:27:54 - Oil lines, how they should be and how they work.
01:35:06 - Some extra stuff to know with Pre-unit motors about oil lines.
01:35:35 - Oil pressure reals valve on a Triumph Unit Motor.
01:38:06 - What to drain, unplug etc. and what not to on Triumph Unit Motor.
01:42:28 - Oil Change on Triumph Pre-unit Motor differences.
01:49:19 - Primary cover on Triumph Pre-Unit Motor.
01:50:57 - Chain Adjustments.
01:51:03 - Adjust the primary chain on a Triumph Pre-Unit Motor.
02:07:01 - Check your chain for ware and check your sprocket.
02:08:26 - BSA Chain adjustment differences.
02:09:35 - What to look out for in Dunlop vintage British Wheels.
02:11:33 - Transmission Primary chain adjustment on swing arm Triumph Pre-Unit motor.
02:14:26 - Carburetors on Triumph Pre-Unit.
02:17:03 - Adjust primary chain on Triumph Unit Motor.
02:20:25 - Adjust primary chain on BSA Motor.
02:24:14 - Clutch Adjustments.
02:24:25 - Clutch adjustment of the pushrod on a Triumph Unit Motor.
02:26:58 - Clutch cable adjustment on a Triumph Pre-Unit Motor.
02:32:44 - Clutch cable adjustment on a Triumph Unit Motor.
02:36:44 - Carburetor Tips, Basics on Amal Carbs.
02:46:14 - Setting up proper slack in your throttle cable that goes to your carburetors.
02:56:35 - Float Stuck talks. 02:57:29 - single carb vs dual carb setup.
02:58:43 - Dissembling and cleaning your Amal Carburetor.
03:11:07 - Electrical System Maintenance.
03:11:24 - Test your battery.
03:16:18 - Quick test of the alternator.
03:17:30 - Test Light basics.
03:22:31 - Test the length of your spark.
03:23:38 - Lucas competition magneto overview.
03:25:19 - Boyer ignition plate installation on a Triumph Unit Motor.
03:30:20 - Boyer ignition plate installation on a BSA Motor.
03:31:38 - Adjust points on a BSA Motor.
03:35:51 - Handy Dandy Tips and Tricks.
03:38:52 - Compression Test.
03:43:04 - Trouble starting?
03:45:30 - Chassis and Wheels.
03:45:38 - Check your wheel bearings.
03:50:41 - Putting the wheel hub / brake plate back together.
03:52:27 - Check your brakes.
03:55:34 - Triumph Pre-Unit front wheel overview.
03:56:28 - Changing out neck bearings with a Timken bearing conversion kit.
04:06:56 - How to check your steering head in your neck.
04:08:09 - tighten up the triple trees.
04:10:29 - Check your tire pressure!
04:11:09 - Outro, Thanks for watching now go for a ride!