Lowbrow Customs 2008 Harley-Davidson Fuel Injected Sportster Chopper.
FINALLY... A PLUG-AND-PLAY EFI SPORTSTER CHOPPER WIRING HARNESS
Fuel injection can be a really awesome thing to have on a motorcycle. Its fuel efficient, you don't have to mess around with jetting your carburetor, and you can even tune your bike easily with a FuelPak Tuner from your phone. Its just a turn key and go solution that makes these great bikes to own.
2.5 gallon Sporty Frisco Tank that accepts OEM Fuel pump.
Fuel injected motorcycles are extremely reliable and most have really low miles on them, making them great choice when buying a motorcycle. But with all this technology comes a big ole' hunk of a computer and a slue of freakin' wires.
It's like a your motorcycle has rats nest of spaghetti running through it. With all of that spaghetti in mind, it brings up a real challenge when trying to build a chopper out of a fuel injected motorcycle. So much so, that most people don't even try.
The Computer mounted to rear fender with ECM Fender Mount Box.
We wanted to change that mindset, so we developed a EFI Chopper wiring harness that is 90% plug and play. We left a few longer whips to give options on headlight, tail light and brake light switch options. This allows you to focus more on the fun stuff when building your chopper and less worries about what everyone hates doing; wiring.
Lowbrow Customs 2008 Harley-Davidson Fuel Injected Sportster Chopper - B Side.
This harness was designed around a Gasbox Full Rigid Full frame for 2007-2013 Fuel injected Harley-Davidson Sportster models. The harness can be used on other frame options as it is particular to the 2007-2013 Sportster electrical system and not the frame itself. That being said, it is designed using a Gasbox frame so that frame offers the most clean and tidy install.
We also have to give a HUGE thank you to Tim Fiorucci for the countless hours he spent accidentally becoming the EFI Sportster wiring guru. This was an intense and complex project, and Tim had the goal of putting in the hard work to make fuel-injected Sportster choppers easier to build with a plug-and-play wiring harness. Thanks Tim!
VIDEO: INSTALL A CHOPPER WIRING HARNESS ON FUEL INJECTED 2007-13 HARLEY SPORTSTERS
In this video Tim Fiorucci shows you step by step how to install the EFI Wiring Harness onto a 2008 Harley-Davidson Sportster Chopper. Learn about the steps you have to take with deleting the security before chopping up your bike or if you already have chopped it up, find out the alternative options you have.
Tim then walks you through the best way to set up the bike for this wiring harness to work easily. He then shows you where each of the wires and plugs go and explains there functions.
DIAGRAMS: EFI SPORTSTER CHOPPER WIRING HARNESS
Here is a detailed exploded view of the wiring harness.
Fuse box layout when opened. (Note) the numbers on the starter relay are "Terminal Pins" that need to be in that orientation if ever removed and or replaced. Both relays are the same size and have same "Terminal Pin" numbers.
Related Products
