Finish Line Motorcycle Custom Grips and Foot Pegs
Finish Line Motorcycle Custom Grips
Finish Line Grips are machined aluminum grips with a rubber knurled insert that gives a comfortable, stable grip despite hot or wet conditions. The right-side grip serves as a grip and throttle tube all in one and can be used with single or dual cable setups and with whichever throttle housing you choose. The motorcycle handlebar grips and throttle tube are machined out of one solid piece of aluminum.
The left-hand grip is held on with two set screws and can be tightened and locked in place with the included allen wrench. Machined out of solid aluminum and guaranteed to handle all the miles you can throw at them. For 1" handlebars. They come in a Polished Aluminum and Black Aluminum finish.
Finish Line Foot Pegs
Finish Line Foot Pegs are machined aluminum with a rubber knurled insert for added grip and vibration dampening. They hold up well and give secure footing through wet and dry conditions, and being machined out of solid aluminum, they can withstand all the abuse you throw at them.
The male clevis bolts right in place of rider and passenger foot pegs on Harley-Davidson motorcycles. They also come in a Polished Aluminum and Black Aluminum finish to coordinate with The Finish Line grips.
The Finish Line Shifter Peg matches the Finish Line grips and foot pegs also coming in a Polished Aluminum and Black Aluminum, or it can be run on it's own. Machined aluminum with a non-slip, rubber knurled insert. Fits Harley-Davidson motorcycles and any others that feature a shifter that accepts 1/4-28 threads. Machined out of solid aluminum and guaranteed to handle all the miles you can throw at it.
Pursuit Grips and Foot Pegs For Custom Harley-Davidsons Choppers & Bobbers
Machined grips for 1 inch handlebars offer a stark alternative to typical rubber motorcycle grips. The right-side grip serves as a grip and motorcycle throttle tube all in one and can be used with single or dual cable setups and with whichever throttle housing you choose.
The left-hand grip is held on with three small set screws and can be tightened and locked in place with the included allen wrench. Machined out of solid aluminum and guaranteed to handle all the miles you can throw at them. These come in a Raw Aluminum, Black Aluminum, or Brass finish and are sure to make your bike stand out above the rest.
Pursuit Foot Pegs
The no-nonsense motorcycle foot pegs do not try to look like something they aren't. They are not made to intimidate with spikes or skulls, or to harken the sense of an unrelated era or motif. They perform the job they were intended to without calling undue attention to themselves. Form follows function, and the heavy knurling and larger diameter end cap ensure your feet aren't slipping off while you are riding down the road.The male clevis bolts right in place of rider and passenger pegs on Harley-Davidsons. They are machined out of solid aluminum and guaranteed to handle all the miles you can throw at them. These come in the same three finishes Raw Aluminum, Black Aluminum, and Brass to coordinate your bike's look.
Cole Foster Signature Grips
Salinas Boy Cole Foster is famous for his steady hand, cool eye and unwavering attention to detail. Inject a handful of King Cole's custom style into your chopper with Cole Foster Grips from Lowbrow Customs.
These grips measure 4 7/8" long, sold per pair. It is important to choose the proper size grips for your motorcycle.
Fish Scale Grips
Fish Scale Grips from Lowbrow Customs have proven themselves as an instant ic, with subtle styling to set off your custom moto. Injection molded Krayton rubber with just the perfect amount of density while the unique fish scale pattern and mid-size flange stands out from the crowd. The Fish Scale Grip was inspired by traditional chopper paint jobs and brought into the three dimensional realm. Sold per pair. It is important to choose the proper size grips for your motorcycle.
Grips are available in 1 inch (the size needed for all Harley-Davidsons and other 'cruiser' style motorcycles) as well as 7/8 inch (common on many vintage British, European and Japanese motorcycles such as Triumph, Honda and Yamaha). Please note that any pair of motorcycle grips has two different inside diameters.The grip for the left side (as if you were sitting on the bike) of the handlebar has a smaller diameter, and the right side grip has a larger inside diameter to fit over your throttle tube. Grips are manufactured to have a tight fit, you don't want one sliding off while taking a corner or twisting the throttle! They are easy to install using a bit of WD-40 to help get them in place. Alternatively, you can use compressed air as seen in our Basic Motorcycle Grip Info & Install video.