VIDEO: Lowbrow Customs - Pursuit Grips and Pegs for Custom Harley-Davidsons Choppers & Bobbers
Machined grips for 1 inch handlebars offer a stark alternative to typical rubber motorcycle grips. The right-side grip serves as a grip and throttle tube all in one and can be used with single or dual cable setups and with whichever throttle housing you choose. The left-hand grip is held on with three small set screws and can be tightened and locked in place with the included allen wrench. Machined out of solid aluminum and guaranteed to handle all the miles you can throw at them. These come in a Raw Aluminum, Black Aluminum, or Brass finish and are sure to make your bike stand out above the rest.
The no-nonsense foot pegs do not try to look like something they aren't. They are not made to intimidate with spikes or skulls, or to harken the sense of an unrelated era or motif. They perform the job they were intended to without calling undue attention to themselves. Form follows function, and the heavy knurling and larger diameter end cap ensure your feet aren't slipping off while you are riding down the road. The male clevis bolts right in place of rider and passenger pegs on Harley-Davidsons. They are machined out of solid aluminum and guaranteed to handle all the miles you can throw at them. These come in the same three finishes Raw Aluminum, Black Aluminum, and Brass to coordinate your bike's look.
Matching the Pursuit Foot Pegs in style and creed, the Pursuit Shifter Peg is exactly what it needs to be. The heavy knurling ensures positive, non-slip contact when shifting. Fits Harley-Davidson motorcycles and any others that feature a shifter that accepts 1/4-28 threads. Machined out of solid aluminum and guaranteed to handle all the miles you can throw at it. Again offered in the same three finishes Raw Aluminum, Black Aluminum, and Brass to complete the overall look.
Check out the Lowbrow Customs YouTube channel to check out all of our videos. We spend a lot of time and effort creating motorcycle how-to videos, product reviews and event coverage for your enjoyment, please let us know what you think. Click here to subscribe to the Lowbrow Customs YouTube channel and stay in the know!
You can read a full transcription of this video below:
Hey. It's Tyler with Lowbrow Customs here in our headquarters in Brunswick, Ohio. If you guys like these videos, go ahead and click the subscribe button and you will be notified every time we come out with one of these new videos. This is the Pursuit line of grips, foot pegs and shifter pegs from Lowbrow Customs. We decided to do a down and dirty form following function version of these products just to basically get rid of scary skulls and flames and all the tough guy BS that typically befalls motorcycle accessories. Instead of embellishing your ride with a bunch of BS, these do the job.
They do what they need to do and they will hold up for years and years, and that's pretty much all there is to it. They're very heavy knurling on all of these gives you a firm grip, keeps your foot from slipping, keeps your toe from slipping on the pegs. They're also available in several materials. There is aluminum, there is also a black version in aluminum. Then we also have machined solid brass for all three versions as well for those of you that want a brass accent on your bike. The foot pegs have a male clevis that is for use on Harley-Davidsons. These work with female clevis for both rider pegs as well as passenger pegs.
The matching shift peg available in matching finishes has a 5/16th to 18 threaded and stud that is adjustable in length. This also has a broached Allen so you can use a little thread lock and tighten it in. You can also remove that stud if you need to use a bolt from the other side of your lever depending on what style of shifter lever you have set up on your bike.
The grips feature an integrated throttle tube. Being that they're solid aluminum, you don't have to worry about a broken tang where your cable ferrule registers, and like on a stock plastic throttle tube found on most motorcycles, they're going to holdup to any wear and tear, as many miles you can throw at them.
The left side grip, being that it's not rubber which would normally either use a little adhesive or friction to hold it in place, it comes with three Allen head grub screws as well as a small Allen wrench and those simply tighten in against your handlebar and that locates that grip.
The Pursuit line of grips, foot pegs and shifter pegs is available at www.lowbrowcustoms.com. Thanks for watching.
