FREE SHIPPING ON ALL U.S. ORDERS OVER $39.95*

Lowbrow Learnins: How-To DIY Rogue Fender Harley Big Twin Bolt-On '58-'84

Art & Tech Tip by Cycle Monster

- 1/2" wrench
- 1/4" Drive Rachet
- 3/8" Drive Rachet
- 5/16" Socket
- 3/16" Allen
- 9/16" Wrench
- 9/16" Socket
 
Remove your old rear fender.
 
Mount fender struts on the inside of the frame using 5/8" nylock nuts.
 
The recessed strut face goes against the frame.
 
Install the 1/2" fine thread bolt. Make sure to use a lock washer and some Blue Loctite. Tighten these up good!
 
Slide the Lowbrow Customs Rogue Fender under the struts rather than pushing the fender down in between them. Make sure to protect your paint!
 
Tighten up the last six fasteners and use a dab of Blue Loctite.
Leave a Reply
  •