- 1/2" wrench
- 1/4" Drive Rachet
- 3/8" Drive Rachet
- 5/16" Socket
- 3/16" Allen
- 9/16" Wrench
- 9/16" Socket
Mount fender struts on the inside of the frame using 5/8" nylock nuts.
The recessed strut face goes against the frame.
Install the 1/2" fine thread bolt. Make sure to use a lock washer and some Blue Loctite. Tighten these up good!
Slide the Lowbrow Customs Rogue Fender
under the struts rather than pushing the fender down in between them. Make sure to protect your paint!
Art & Tech Tip by Cycle Monster